Sensei EP Trainer RxR

This is the 2.4GHz Radio Controlled, Brushless Electric Powered
RXR (Receiver Ready) Sensei Foam Trainer Airplane from Flyzone by Hobbico.
This version includes motor, ESC and servos.

Features

Construction: Aero-Cell foam with "drop door" in fuselage to deploy
a parachute or other creative payloads while in flight
Wings: Two piece
Aileron Control: Dual servo
Tail Section: Attaches with one screw and features self-aligning
stabilizer
Motor: Brushless, specs such as kV and RPM not provided by
manufacturer
Electronic Speed Control: 30A brushless compatible
Servos: Five micro
Landing Gear: Main, prebent aluminum 0.098" (2.5mm) thick
Wheels: Three foam 2.5" (63.5mm)
Propeller: 10x5 plastic
Spinner: 1.75" (45mm) diameter black plastic
Warranty: Hobbico guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.

Includes

Sensei Foam Trainer Airplane with Motor ESC, five micro Servos, Prop,
Spinner, Landing Gear, Wheels and Instruction Manual

Requires

Transmitter/Receiver: 6-channel, TACJ2600
AA Batteries: Four if using transmitter listed above
LiPo Battery: 2100mAh 11.1V, HCAA6387
Battery Charger: LiPo compatible w/balancing capability, GPMM3155
Pliers and phillips screwdriver

Specifications

Wingspan: 58" (1475mm)
Wing Area: 566 sq in (36.5 sq dm)
RTF Weight: 3.2lbs (1450g)
Length: 48" (1220mm)
Airfoil: Flat bottom
Configuration: High wing
Center of Gravity: Draw a mark 1/4" (7mm) back and 1/4" (7mm) forward
from the front of the aileron servo cover. The plane should
balance between these two marks.
Control Throws:
Elevator, Up/Down: 1/2" (15mm)
Rudder, Right/Left: 5/8" (16mm)
Ailerons, Up/Down: 1/2" (15mm)