With the allure of longer flight times, more pilots are turning to high-capacity Lithium Polymer batteries for their park flyers. E-flite’s new Celectra™ charges Li-Po packs at five different rates, ranging from 250mA to 2A.

Description:

- The Precision CNC Aluminum frame is designed to improve performance over stock plastic frame on the Eflite Blade CP helicopters. This new aluminum frame and aluminum landing gear combo not only brings the great new look for the Blade CP but also the highest quality and performance frame on the market. All parts are 100% aluminum machined to bring the rigidness to the frame system. The frame is made of strong aluminum material to eliminate all flex on the frame to provide accuracy in servo movements. Moreover, the tail boom clamp design with two pieces to facilitate tail boom removal and installation. The landing gear is made of 3mm strong carbon fiber rods and aluminum landing gear to reduce the chance of broken landing gear. This combo is a great upgrade for your Blade CP. This frame and landing gear is compatible with stock plastic head and stock tail boom.

- Silver anodizing version.

Includes:

- Precision carbon fiber battery and 4-in-1 mount
- Carbon fiber swashplate guide
- Precision aluminum frame
- Strong carbon fiber landing gear
- Strong aluminum landing skids
- Precision main shaft bearings included.
- All hardware included.

Requires:

- Loctite all screws and bolts (recommend loctite 242).
- Assembly

Weight:

50.8g

Usage:

- For Blade CP, CP PRO

Instruction:

- Included in the package.

Features:

- 100% Precision CNC machined Aluminum
- Adjustable servo mounting
- True 120CCPM servo layout
- Easy to install and assemble servos
- Combination between strong aluminum frame and carbon fiber rods and plates
- Strong aluminum landing gear to reduce chance of broken weak stock landing gear.
- High quality main shaft bearings included
-

The Precision Main Blade Grips are designed for the Blade CP. The product is 100% aluminum CNC machined to provide best precision and durability. Moreover, the light and stylish high quality aircraft aluminum blade grips can help reduce the flex in the Blade CP head and improve cyclic response on the E-FLITE Blade CP/P helicopters.

Includes:
-Two (2) high quality aluminum blade grips
-Double bearings on each blade grips installed
-Two (2) CNCed brass balls.
-All hardwares and allen keys included.

Requires:
-Loctite (#242 is recommended)
-Assembly

The Precision Main Blade Grips are designed for the Blade CP. The product is 100% aluminum CNC machined to provide best precision and durability. Moreover, the light and stylish high quality aircraft aluminum blade grips can help reduce the flex in the Blade CP head and improve cyclic response on the E-FLITE Blade CP helicopters.

Includes:
-Two (2) high quality aluminum blade grips
-Double bearings on each blade grips installed
-Two (2) CNCed brass balls.
-All hardwares and allen keys included.

Requires:
-Loctite (#242 is recommended)
-Assembly

Description:

-The Precision metal linkagae balls are made of aluminum with highest tolerance to ensure perfect fit in the plastic ball ends. It is also chome plated on the surface for long lasting purpose. It is to replace for the metal linkage balls of the MicroHeli Precision CNC Head System MH-CP002HS3 only

Includes:

-4 long linkage balls
-4 short linkage balls

 Requires:

-Loctite (recommend loctite #242) 

Usage:

 - For MicroHeli Precision CNC Head System MH-CP002HS3 only

Features:

100% Precision CNC machined Aluminum
Chrome plated surface treament for long lasting purpose

Description:

-The Precision CNC Center Hub is made of strong aluminum with highest precision to ensure best performance. It is to replace for the center hub of the MicroHeli Precision CNC Head System MH-CP002HS3 only

-Silver anodizing version.

 Includes:

-Precision CNC Center Hub
-2 aluminum washers
-2 O rings

Requires:

-Loctite all screws and bolts (recommend loctite 242).
-Assembly

Weight:

 4.1g
Usage:
- For MicroHeli Precision CNC Head System MH-CP002HS3 only

Features:

100% Precision CNC machined Aluminum
Very stylish and light weight design

Description:

The Precision CNC Center Hub is made of strong aluminum with highest precision to ensure best performance in the head system. It is to replace for the center hub of the MicroHeli Precision CNC Head System MHECP002HS3 only
-Blue anodizing version.

Includes:

-Precision CNC Center Hub
-Precision Center Sleeve
-Head button
-2 O rings
-2 aluminum washers

 Requires:

-Loctite all screws and bolts (recommend loctite 242).
-Assembly
Weight:
4.1g

Usage:

- For E-Flite Blade CP/PRO only. 

Features:

100% Precision CNC machined Aluminum
Very stylish and light weight design

Description:

-The Precision CNC Center Hub is made of strong aluminum with highest precision to ensure best performance in the head system. It is to replace for the center hub of the stock E-flite Blade CP/PRO only.

-Blue anodizing version.

Includes:

-Precision CNC Center Hub.
-Precision Center Sleeve.
-Head button.
-2 O rings.
-2 aluminum washers .

Requires:

-Loctite all screws and bolts (recommend loctite 242).
-Assembly.

Weight:

4.1g

Usage:

- For E-Flite Blade CP/PRO only.

Features:

-100% Precision CNC machined Aluminum.
-Very stylish and light weight design.

The Precision CNC Head System is designed to improve performance over stock plastic head on the Eflite Blade CP helicopters. This new Bell-Hiller design head system brings not only the great new look for the Blade CP but also the highest quality and performance head system on the market. All parts are 100% aluminum machined to bring highest tolerance and to remove all unwanted slop and play in the plastic head system.

Includes:
-Precision CNC Swashplate
-Precision CNC Blade Grips
-Precision CNC Flybar System
-Precision Steel Spindle Shaft
-All linkages rods included
-All hardware included.

Requires:
-Loctite all screws and bolts (recommend loctite 242).
-Assembly

Usage:
-For Blade CP, CP2, Hornet, 3DPRO, Walkera 22E, Venom Night Ranger 3D

Instruction:
-Included in the package

Description:

- The Precision CNC Head System is designed to improve performance over stock plastic head on the Eflite Blade CP helicopters. This new Bell-Hiller design head system brings not only the great new look for the Blade CP but also the highest quality and performance head system on the market. All parts are 100% aluminum machined to bring highest tolerance and to remove all unwanted slop and play in the plastic head system.

- Blue anodizing version.

Includes:

- Precision CNC Swashplate
- Precision CNC Blade Grips
- Precision CNC Flybar System
- Precision Steel Spindle Shaft
- All linkages rods included
- All hardware included.

Requires:

- Loctite all screws and bolts (recommend loctite 242).
- Assembly

Usage:

- For Blade CP/PRO, CP2

Instruction:

- Included in the package.

Features:

- 100% Precision CNC machined Aluminum.
- Each blade grips are equiped with tripple high precision bearings and each mixing arms are designed with double bearings to ensure slop-free performance.
- Designed with M3 nylon locknuts for maximum main blade grip security.
- All ball linkages are made of brass and chrome plated for longest life span
- Swashplate main center balls are made of stainless steel to eliminate all the wear out of the center ball that may cause slop.
- Swashplate is designed with almost 25% more tilting angle for faster cyclic response.
- Total 11 high quality bearings in the head system.
- Very stylish and light weight design.

Description:

-This is the hardware set including screws and set screws for MicroHeli Precsion Head System MH-CP002HS3 for Blade CP/PRO

Includes:

-12 screws and set screws

Requires:

-Loctite all screws and bolts (recommend loctite 242).
-Assembly

Usage:

-For MicroHeli Precsion Head System MH-CP002HS3 for Blade CP/PRO

Description:

-These linkages rod end set is to replace the linkages in MicroHeli Precision Head System MH-CP002HS3

Includes:

-6 linkages rod ends


Usage:

-For E-flite Blade CP/PRO and Esky Honey Bee CP2 Helicopters 

Description:

-Replacement stock spindle shaft with this strong steel spindle shaft precisely grounded for prefect alignment.

Includes:

-Steel spindle shaft
-Two brass washers
-Two hex bolts.

Weight:

2.1 grams

Usage:

-For Balde CP and CPPRO and Esky Honey Bee CP2 Head

The NEW 120 degree CCPM Swashplate version is designed to use on E-FLITE Blade CP/CP2 helicopters. It's stylish and super light weight aircraft-aluminum swashplate is designed to bring best cyclic control and performance to your helicopter in flights.

Central ball is produced with stainless steel material to provide best durability, together with smoothness in motion and rust-less advantage. The combination of the stainless steel center ball and high strength plastic ball housing will provide slop-free operation and ultra smoothness cyclic movements.

Includes:
-120 CCPM swashplate
-All hardwares

Requires:
-Loctite (#242 is recommended)
-Assembly

Description:

- The Aluminum CNC Tail Twin Motor Mount is designed to serve as dual motor housing for E-FLITE Blade CP. The Blade CP tail motor has very short working lifespan and easy to burn after a short period of time. The purpose of the twin motor mount is to split the current load on Blade CP tail motor into both tail motors thus can prolong the life of the tail motors.

- The Aluminum CNC Tail Twin Motor also ultilizes double high quality flange bearings to support the tail shaft and brings super smoothness to the tail of the Blade CP.

- Silver anodizing version.

Includes:

- Aluminum CNC Tail Twin Motor Mount
- Two high quality flange bearings
- Four screws.
- Allen key

Weight:

4.1g including bearings.

Usage:

- For Blade CP and Esky Honey Bee CP2 Helicopters

Instruction:

- Wire motors in parallel as in picture below.

Features:

- 100% Precision CNC machined Aluminum.
- Prolong the lifespan of the tail motors.
- Ultilize double bearings for super smoothness of tail operation at high speed.
- Aluminum dual motor housing serving as motor cooler.
- Reduce 50% of crash due to tail motor failure in flight.
- New design with rigid tail boom holder by 4 bolts to elimiate glue on the tail boom.
- Very light weight and stylish design.

Description:

-The Aluminum CNC Tail Twin Motor Mount is designed to serve as dual motor housing for E-FLITE Blade CP. The Blade CP tail motor has very short working lifespan and easy to burn after a short period of time. The purpose of the twin motor mount is to split the current load on Blade CP tail motor into both tail motors thus can prolong the life of the tail motors.

-The Aluminum CNC Tail Twin Motor also ultilizes double high quality flange bearings to support the tail shaft and brings super smoothness to the tail of the Blade CP.

-Blue anodizing version.

Includes:

-Aluminum CNC Tail Twin Motor Mount
-Two high quality flange bearings
-Four screws.
-Allen key 

Weight:

-4.1g including bearings.
Usage:
-For Blade CP and Esky Honey Bee CP2 Helicopters

Instruction:

 -Wire motors in parallel as in picture below.

Features:

-100% Precision CNC machined Aluminum
-Prolong the lifespan of the tail motors
-Ultilize double bearings for super smoothness of tail operation at high speed
-Aluminum dual motor housing serving as motor cooler
-Reduce 50% of crash due to tail motor failure in flight
-New design with rigid tail boom holder by 4 bolts to elimiate glue on the tail boom
-Very light weight and stylish design.

The Vertical Tail Fin is machined from Carbon Fiber material, very light, strong and stylish. It is designed protect tail rotor and tail motor during hard landing. And yet, the Vertical Tail Fin is also made with 1.50mm thickness Carbon Fiber sheet to minimize Tail Fin vibration. It is to replace the stock vertical rod on EFLITE Blade CP/CP2 helicopters.

Includes:
-Carbon Fiber Tail Fin
-Aluminum CNC fin holder
-Screws and allen key included

Requires:
-Loctite (#242 is recommended)

Weight:
4.5g

Usage:
-E-FLITE Blade CP/ Honey Bee CP2 helicopters
-MicroHeli Aluminum Tail Twin Motor Mount MH-CP025M

Description:
-The hardened stainless steel main shaft is designed to work with MicroHeli auto-rotation main gear MH-CP102LT or MH-CP102M. It is NOT a direct replacement of the stock main shaft and it requires an auto-rotation main gear MH-CP102LT or MH-CP102M to work on the Blade CP/PRO. It is made by strong stainless steel material so it is much harder than stock steel shaft and is grounded perfectly to provide accuracy and remove all slop in the head area. The hardened stainless steel main shaft brings better performance on the E-FLITE Blade CP/PRO helicopters.


Includes:

-Stainless steel main shaft
-Main shaft collar and set screws
-Allen key
-2 washers

Requires:

-For Blade CP and Blade CP PRO, require MicroHeli auto-rotation main gear MH-CP102LT or MH-CP102M.

Weight:

-1.2g

Usage:

 -Eflite Blade CP/PRO

Features:

-100% Precision CNC machined stainless steel
-Reduce chances of bent main shafts on stock head
-Precision Grounded +0.00 to -0.01mm tolerance
-Feature flat spot to secure set screws

Description:

-The Precision CNC Flybar System is designed to replace stock plastic flybar system on the E-flite Blade CP PRO helicopters.

-The Aluminum CNC Tail Twin Motor also ultilizes double high quality flange bearings to support the tail shaft and brings super smoothness to the tail of the Blade CP.

-Blue anodizing version.

Includes:

-Aluminum CNC Flybar System
-Two high quality ABEC-5 miniature bearings
-Two CNC brass spacers
-Allen key

Weight:

-11.1g including bearings.

Usage:

-For Blade CP PRO helicopters

Features:

-100% Precision CNC machined Aluminum
-Designed with high quality bearings for smoother cyclic movement.