The Basics of RC
Airplanes and Helicopters

What You Need to Know

Email Newsletter

Sign up for our newsletter
and receive new product announcements and release date updates, as well as special offers.
Find us on Facebook Find us on Youtube
SEAX114

Mini Nemesis EP

Seagull SEAX114 Airplane Electric ARF
In Stock
Add To Cart
$139.99

Features

• Very light contest balsa and balsa plywood construction delivers lower weight for lighter wing loading and increasing performance substantially
• Covered and trimmed in genuine Hangar 9 UltraCote that is durable, shiny, and easy to repair
• Generous-sized magnetic top hatch for easy battery and radio gear installation
• Precisely painted fiberglass cowling and landing gear fairings
• Plug-in wings with high-strength carbon rod spar give pilots a plane with added strength for high-stress maneuvering that is easier to build and transport than a one-piece wing
• Scale cockpit with racing pilot included
• All necessary hardware and accessories included ensures that there is nothing left to supply other than electronics and a little elbow grease to get the airplane airworthy
• Full decal sheet included

Specifications

Type: Airplanes
Wingspan: 36.8 in (935mm)
Overall Length: 31.1 in (790mm)
Flying Weight: 30.4-33.6 oz (860-950 g)
Motor Size: 450- to 480-size motor
Radio: 4-channel minimum radio system
Servos: (2) sub-micro and (3) super sub-micro servos
Prop Size: 10 x 7 Electric Propeller
Wing Area: 248 sq. in. (16.0 sq. dm.)
Recommended Environment: Outdoor
Speed Control: 30-Amp Brushless
Assembly Time: 5-7 Hours
Recommended Battery: 11.1V 3S 1800-2200mAh LiPo
Experience Level: Intermediate
Is Assembly Required: Yes
Minimum Age Recommendation: 14 years
Spinner Size: 1-3/4 in (45mm)
Trim Scheme Colors: UltraCote White (U870), Midnight Blue (U885), True Red (U866), Silver (U881)
Approximate Flying Duration: 6 minutes
CG (center of gravity): 2.25-3.00 in (57-77mm) back from leading edge at root
Control Throw (Ailerons): Low: 3/8 in (10mm) up/down; High: 1/2 in (12mm) up/down)
Control Throw (Elevator): Low: 3/8 in (10mm) up/down; High: 1/2 in (12mm) up/down)
Control Throw (Rudder): Low: 9/16 in (15mm) left/right; High: 13/16 in (20mm) left/right