Axe 100 SSL Brushless Helicopter with LEDs Tx-R

This is the brushless electric powered, radio controlled
Tx-R Heli-Max Axe 100 SSL (Super Sport LED)
Ideal for 3D Aerobatics Indoors or Outdoors.
This is the Tx-R (Transmitter Ready) version that includes servos,
an ESC and receiver.
With the AnyLink SLT 2.4GHz Radio Adapter (TACJ2000) separate purchase
and the appropriate AnyLink cable
any compatible 6-channel heli aircraft transmitter
may be used to fly this helicopter

**Additional Technical Info Will Be Added When It Becomes Available.**

Features

Rotor Head: 120� CCPM flybarless collective pitch rotor head
Lights: Super-bright LEDs built into the blades and tail, powered by
the main battery-no extra battery required, red LED identifies the
tail, on main blade two LEDs on top indicate upright flying and two
green LEDs on bottom indicate inverted flying
Frame: Composite plastic construction with reinforcement at key
points for added strength and rigidity
Motor: Main, 14,750kV brushless outrunner, tail motor-brushed
Servos: Rotary-drive, digital
Receiver:
Gyro: TAGs (Triple Axis Guro Stabilization) stabilizes all three
axes simultaneously and neutralizes the impact of wind and other
outside forces on handling
Electronic Speed Control: 10A with soft cut off and slow start
Battery: 3.7V 400mAh LiPo
Charger: AC powered, variable rate balancing charger
Canopy: Plastic
Tail Boom: Extended from original Axe 100 for improved tail authority
Tail Rotor: Motor driven
Warranty: Heli-Max guarantees this kit to be free from defects in
both material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or modification.

Includes

Tx-R Heli-Max Axe 100 SS with servos, receiver, brushless
motor, LiPo battery, charger, gyro, ESC, LEDs, instruction
manual, and unbreakable landing gear

Requires

Tactic AnyLink SLT 2.4GHz Radio Adapter (TACJ2000) to adapt heli
transmitter (the Futaba Square, TACM0001 and JR, Spektrum, TACM0002
are included with the AnyLink adapter)
*Tactic 2.4GHz 4 or 6 channel transmitters do not require the
AnyLink adapter

Specifications

Rotor Diameter: 9.5" (242mm)
Overall Length: 12.3" (312mm)
Weight: 1.69oz (47.8g) without battery
2.12oz (60.1g) RTF weight
Blade Length: 4.13" (105mm)
Tail Rotor Diameter: 1.5" (38mm)
Height: 3.18" (81mm)
Width: 2.04" (52mm)
Gear Ratio: 8:1