Gee Bee R-1 EP TxR

This is the electric powered, radio controlled, Tx-R (Transmitter Ready)
Gee Bee Sport Scale Airplane from ElectriFly by Great Planes.
This is the Tx-R (Transmitter Ready) version that includes servos,
an ESC and receiver.
With the AnyLink SLT 2.4GHz Radio Adapter (TACJ2000)
and the appropriate AnyLink cable
with compatible aircraft transmitter
4-channels or higher may be used to fly this airplane.
See http://www.tx-ready.com/anylink-chart.html
for full transmitter compatibility chart.

Features

Construction: AeroCell foam with molded-in panel lines and vents
flying wire elastic cord for added scale realism
Wing: One-piece, attaces with one screw under hatch
Aileron Control: Dual servo
Motor: 1000kV brushless
Electronic Speed Control: Great Planes Silver Series 35A, 5V/2A BEC,
GPMM1830
Servos: Four micro (2-aileron, 1-rudder, 1-elevator)
Receiver: Tactic 2.4GHz SLT
Landing Gear: Prebent wire 0.098" (2.5mm) diameter with foam wheel
pants that attach magnetically and break away in the event of a
crash
Wheels: Foam, 1.9" (49mm) diameter
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
the date of purchase. This warranty does not cover component parts
damaged by use or modification.

Includes

RXR Gee Bee Sport Scale Airplane, four Micro Servos, ESC, Flying
Wires, RX, Brushless Motor, Propeller, Landing Gear, three Wheels,
Spinner Hub and Instruction Manual

Requires

Transmitter: Tactic 2.4GHz transmitter w/at least 4 channels OR
AnyLink and compatible 4-channel transmitter (Anylink NOT required
with Tactic 2.4GHz transmitter)
AA Batteries: 4 for transmitter
Battery: 2200mAh 3S 11.1V LiPo
Battery Charger: compatible with selected LiPo battery

Specifications

Wingspan: 38.5" (980mm)
Wing Area: 241" (15.5 dm2)
Weight: 1.75-2.0 lb (790-910 g)
Wing Loading: 16.7-19.1 oz/ft2 (51-58 g/dm2)
Length: 27" (685mm)
Center of Gravity, (CG): 1-1/4" (32mm) back from the leading edge of
the wing at the fuselage sides
Control Throws- Low Rate High Rate
Elevator, Up & Down: 3/16" (5mm) 6° 3/8" (10mm) 12°
Rudder, Right & Left: 1/2" (13mm) 10° 3/4" (19mm) 15°
Ailerons, Up & Down: 1/2" (13mm) 14° 3/4" (19mm) 21°