ElectriFly Yak 54 3D Foam Indoor EP ARF

This is the electric powered, radio controlled, almost ready to fly
ElectriFly by Great Planes Yak 54 3D Indoor Airplane.
Park Pilot Program Legal Aircraft
For Intermediate Modeler/Pilots.
For indoor flight only.

Features

Construction: Lightweight 0.12" (3mm) extruded polystyrene Pro-
Formance foam-an ElectriFly exclusive, alignment jigs aid in fast
assembly and correct alignment, pre-applied graphics are lighter
weight than paint
all flying surfaces pre-hinged with genuine 3M Blenderm tape
which is durable and feather light
Wings: One-piece
Aileron Control: Single servo
Landing Gear: 0.08" (2mm) diameter wire with carbon tail skid
Wheels: Two 1" (26mm) diameter hard plastic
Hardware: Carbon fiber and laser cut
Building Time: Ready to fly in 2-3 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.

Includes

ElectriFly by Great Planes Yak 54 3D Airplane, instruction manual,
decal sheet, landing gear and hardware

Requires

Radio: 4 channel
Servos: Three micro high torque (1-rudder, 1-elevator, 1-aileron)
Battery Charger: LiPo compatible
Motor: Rimfire Outrunner Brushless
ESC: 8A Silver Series For Brushless Motors
Battery: Power Series 7.4V 300mAh Balanced 2S 20C LiPo Pack
Propeller, building and field equipment

Specifications

Wingspan: 32" (820mm)
Wing Area: 270 sq in (17.4 sq dm)
Weight: 5.5 - 6.7oz (155 - 190g)
Wing Loading: 2.9 -3.5oz/sq ft (9 - 11g/sq dm)
Length: 36.5" (920mm)
Center of Gravity: 3/4" (19mm) in front of + mark on fuselage
Control Throws-
Low Rate 3D Rate
Elevator: 1-3/4" (44mm) 30° 2-3/4" (70mm) 52°
Rudder: 1-3/4" (44mm) 20° 4" (102mm) 53°
Ailerons: 2" (51mm) 27° 3-1/2" (89mm) 53°