ElectriFly Extra 330SC 3D Foam Indoor EP ARF

This is the radio controlled, brushless electric powered, almost ready to fly
ElectriFly Extra 330SC 3D Foam Plane.
For indoor or outdoor flying.
Park Pilot Program Legal Aircraft

Features

Construction: 3mm extruded polystyrene Pro-formance foam, an
ElectriFly exclusive, control surfaces are prehinged with 3M
Blenderm tape hinges
Wing: One-piece with factory installed carbon fiber wing spars
Motor Mount: Pre-drilled plywood
Landing Gear: Wire
Wheels: Five-spoke, black nylon
Warranty: Great Planes® Model Manufacturing Co. guarantees this kit
to be free from defects in both material and workmanship at the
date of purchase. This warranty does not cover any component
parts damaged by use or modification.

Includes

ElectriFly Extra 330SC 3D Foam Plane with landing gear, wheels,
motor mount, pushrods, carbon rods, brace doublers, control horns
and instruction manual

Requires

Radio: 4-channel with mini receiver
Servos: Three micro high torque
For Indoor Flight Performance-
Motor: RimFire 250 (GPMG4502)
Battery: 7.4V 300mAh LiPo (GPMP0700)
ESC: 8amp Brushless (GPMM1800)
Propeller: 8x4E (APCQ5000)
For Outdoor Flight Performance-
Motor: RimFire 300 (GPMG4505)
Battery: 11.1 volt 300mAh (GPMP0701)
ESC: 8amp Brushless (GPMM1800)
Propeller: 8x4E (GWSQ2009)
Battery charger and building & field equipment

Specifications

Length: 35" (890mm)
Wingspan: 32.5" (825mm)
Wing Area: 267 sq in (17.2 sq dm)
Wing Loading: 3.4 - 3.7oz/sq ft (10 - 11g/sq dm)
Weight: 6.2 - 6.8oz (175 -195g)
Center of Gravity: 5/8" (16mm) aft from the carbon strip in the wing
Control Throws-
Low Rate High Rate 3D
Elevator: 1" 25mm 18° 1-7/16" 35mm 25° 2" 50mm 38°
Rudder: 1-5/8" 41mm 19° 2-5/8" 67mm 32° 3-3/4" 95mm 29°
Ailerons: 1" 25mm 13° 1-3/4" 44mm 22° 3-3/4" 95mm 56°