Cart
Wishlist
Eratix 3D 25e ARF
E-flite EFL4075
Airplane
Electric
ARF
In Stock
$209.99
Use Coupon Code CPNrcplane for 10% off this RC plane. Offer ends July 31, 2013.
This item has an oversize charge of $8.50.
The E-flite® Eratix™ 3D 25e ARF is a 3D-capable sport plane designed to make the transition from sport models to more challenging 3D aircraft a lot less demanding. Its large wing area and light wing loading offer very forgiving flight characteristics, especially in slow flight. It’s also compatible with a range of motor and propeller sizes so you can fine tune the power and performance to your skill level. Both the E-flite Power 25 and Power 32 brushless outrunner motors bolt to the firewall without any modifications. Experienced 3D pilots will appreciate the uniquely designed, machined aluminum 3D control arms that can handle the rigors of high-torque mini servos and large control throws. Sport aerobatics or stick-bending 3D, the Eratix 3D 25e is up for whatever you are.
Features
• Capable of sport-to-extreme 3D aerobatics
• Generous wing area and light wing loading for superb slow flight response
• Specially designed, machined, 3D control horns
• Lightweight, open-structure airframe design
• Top quality, laser-cut balsa and lightweight plywood materials
• Firewall accepts E-flite® Power 25 or Power 32 brushless motors without modification
• Tough, lightweight aluminum landing gear with factory-painted fiberglass wheel pants
• Factory-painted fiberglass cowl
• Easy-access magnetic battery hatch
• Ground clearance optimized for a wide range of prop sizes
• Steerable tail wheel
Specifications
Type: Airplanes
Wingspan: 54 in (1370mm)
Overall Length: 53 in (1350mm)
Flying Weight: 3.75–4 lb (1.7–1.8 kg)
Motor Size: Power 25 or 32 required
Radio: 6+ channels
Servos: 4 metal-gear minis
Prop Size: 13 x 6.5E, 14 x 7E, or 15 x 8E depending upon which recommended setup you choose
Wing Area: 695 sq in (44.9 sq dm)
Speed Control: 60A ESC (EFLA1060)
Recommended Battery: 3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po
Hardware Included: Yes
Spinner Size: 2.5"
Trim Scheme Colors: UltraCote Lite White (HANU973), Safety Orange (HANU892), Fluorescent Blue (HANU896), and Clear (HANU964)
CG (center of gravity): 3.75–4 in (80–100mm) from leading edge
Control Throw (Ailerons): High Rate: 3 in (75mm) up and down; Low Rate: 1 in (25mm) up and down
Control Throw (Elevator): High Rate: 3.5 in (90mm) up and down; Low Rate: 1 in (25mm) up and down
Control Throw (Rudder): High Rate: 4.5 in (115mm) left and right; Low Rate: 2 in (50mm) left and right
You Will Need
In order to get your Eratix 3D 25e ARF airborne, you will need the following items:
Radio System: 6+ channels
Servo: 4 mini metal gear servos
Motor: Power 25 or Power 32 motor
Speed Control: 60-amp ESC
Prop: 13 x 6.5E, 14 x 7E or 15 x 8E, depending upon the motor selected
Battery: 3S 11.1V 4200mAh or 4S 14.8V 3850mAh Li-Po
