Mini Pulse XT ARF
E-flite EFL2375
Electric
ARF
In Stock
$129.99
Reduced from $139.99.
The Mini Pulse XT is another aircraft in E-flite’s outstanding line of electric RC aircraft and accessories. E-flite uses top-quality engineering and materials in everything they make, so you always get the maximum level of value and fun. E-flite also backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one.
Features
• 95% factory-built; get flying in 3 hours or less
• Lightweight balsa and lightweight plywood construction
• Firewall accepts E-Flite Park 450 Brushless Outrunner without modifications
• Factory-installed hinges and control horns
• Bolt-on wing and tail
• Factory-painted aluminum landing gear with fiberglass wheel pants
• Steerable tail wheel
• Factory-painted cowl
• Easy-access magnetic battery hatch
• Covered in genuine UltraCote
• Design based on Hangar 9's popular Pulse 40 XT
Specifications
Type: Airplanes
Wingspan: 42.5 in (1080mm)
Overall Length: 37.5 in (875mm)
Flying Weight: 25-27 oz (795-965g)
Motor Size: Park 450 BL Outrunner, 890Kv
Radio: 4 channels
Servos: 4 sub-micros
Prop Size: 10x8 Electric
Scale: Park Flyer
Wing Area: 330 sq in (21.3 sq dm)
Speed Control: 30A Pro SB Brushless
Approximate Assembly Time: 3 hours
Recommended Battery: 2100 mAh 3-cell 11.1V Li-Po
Hardware Included: Yes
Trim Scheme Colors: UltraCote White (#870), Deep Blue (#873), and Orange (#877)
CG (center of gravity): 2-3/4 in (70mm) behind the leading edge
Control Throw (Ailerons): 3/8 in (9mm) Low Rate or 1/2 in (13mm) High Rate
Control Throw (Elevator): 1/4 in (6mm) Low Rate or 1/2 in (13mm) High Rate
Control Throw (Rudder): 1-1/4 in (32mm) Low Rate or 1-1/2 in (38mm) High Rate
You Will Need
E-flite Park 450 BL Outrunner Motor
E-flite S75 Sub-Micro Servos (4)
E-flite 30A Pro Switch-mode BEC Brushless ESC
4-channel or greater Radio
6-channel micro receiver
11.1V 3-Cell 2100mAh Li-Po Battery