Mini Ultra Stick ARF

E-flite EFL2250 Electric ARF

In Stock

$119.99

Reduced from $129.99.

Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick’s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.

Features

• Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer

• 95% factory-built; get flying in 2 hours or less

• Lightweight balsa and plywood construction

• Two firewall options to use a variety of motor sizes, types & brands

• Includes molded firewall stick mount

• Control surfaces have factory-installed hinges and control horns

• Bolt-on tail requires no gluing and secures with two lock nuts

• Optional quad-flap configuration

• Tough, lightweight aluminum landing gear that's factory-assembled and tall enough to accommodate larger prop sizes

• Covered in genuine Hangar 9 UltraCote

• Great match for E-flite Park 450 Outrunner Brushless Motor

• Easy access top battery hatch

• Design based on Hangar 9’s popular line of Ultra Sticks

Specifications

Type: Airplanes

Wingspan: 38.75 in (985mm)

Overall Length: 34 in (865mm)

Flying Weight: 22 - 25 oz (625 - 710g)

Motor Size: Park 400 Inrunner or Park 450 Outrunner

Radio: 4-channel or greater (7-channel for quad flaps)

Servos: 4 sub-micros (6 sub-micros for quad flaps)

Prop Size: 10x7 - 11x7

Scale: Park Flyer

Wing Area: 325 sq in (21 sq dm)

Speed Control: 20A Brushless

Approximate Assembly Time: 1-2 hours

Recommended Battery: 2100 mAh 3-Cell 11.1V Li-Po

Gear Ratio: 6.5:1 when using Park 400 Brushless Inrunner

Hardware Included: Yes

Trim Scheme Colors: UltraCote Fluourescent Blue, Flame Red, Transparent Red & White

Flaps: Yes (optional)

Approximate Flying Duration: 10-20 minutes

CG (center of gravity): 2.50 in (63mm) behind the leading edge

Control Throw (Ailerons): 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate

Control Throw (Elevator): 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate

Control Throw (Rudder): 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate

You Will Need

Brushless Motor
Brushless ESC
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions & Y-harness
4 to 6-Ch Receiver
Li-Po Battery
Li-Po Charger
CA
Propeller